October 2022
View of the top of the power unit with all the cylinder liners removed. Photo by James Whincup
View into the engine block where the cylinder liner lives. Photo by James Whincup
Top of the power unit after being cleaned. Photo by James Whincup
The pistons sat in the table waiting for their rings to be removed. Photo by James Whincup
On the left are the conrods and on the right are the pistons with their gudgeon pins on top. Photo by James Whincup
The cylinder heads being pressure tested. Photo by James Whincup
The oil filter body after the bottom plug had been drilled out, the remains of the plug can be seen on the bottom of the filter. Photo by James Whincup
The oil filter frame on the left and the old oil filter on the right. Photo by James Whincup
The boiler roof section with the fuel tank removed and parts of the roof section cut out. Photo by Steve Rowston
One of the new pieces of roof skin welded in. Photo by Steve Rowston
Our wonderful welder doing what she does best. Photo by Steve Rowston
Other sections of the roof have been rubbed down to trace for any rust or holes. Photo by Paul Seaman
The fuel header tank outer section being rubbed down to inspect for rust and holes. Photo by Paul Seaman
The new cylinder liners closest to us on pallets and the old ones behind. Photo by James Whincup