Galleries Scroll Down « back to albumDecember 2022 Fuel pump area after cleaning. Photo by James WhincupFuel pump area before cleaning. Photo by James WhincupThe centre of the engine in grey gloss. Photo by James WhincupThe intermediate cylinder head covers in grey gloss. Photo by James WhincupInlet manifolds in grey gloss. Photo by James WhincupThe roof section that goes over the turbos being painted. Photo by James WhincupNew of steel piece being welded into the boiler roof. Photo by James WhincupPower unit face where the cylinder liner sits following cleaning. Photo by James WhincupView of cams after the push rod tubes were removed. Photo by James WhincupPush rod tubes on the bench after cleaning and gaskets were removed. Photo by James WhincupThe cylinder head to block water elbows have started to be cleaned and gaskets removed. Photo by James WhincupThe exhaust stacks tops have been painted in primer. Photo by James WhincupThe roof section over the power unit being prepped for painting. Photo by Libby WhincupThe roof section for over the turbos after being painted in gloss. Photo by Paul SeamanThe power unit roof section sides and water tank in gloss and the center of the roof in primer. Photo by Paul SeamanThe inside of the roof section that lives above the power unit in grey gloss, sections around where the roof hatch opens have been left and will be done once the roof is the right way up. Photo by James Whincup